説明
Inkbird ITC-308 Heating and Cooling Temperature Controller
Main features
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with Centigrade or Fahrenheit unit;
- Maximum output load: 1000W(110V)/2000W(220V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Temperature calibration;
- Compressor delay protection for refrigeration control;
- High and low temperature alarms are available;
- Over-temperature and sensor fault alarm;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
- Temperature Control Mode :On/Off Control, Heating and Cooling
- Temperature Control Range : -50~99 °C / -58~210 °F
- Temperature Resolution: 0.1 °C / 0.1°F
- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Ambient Temperature: -30~ 75 °C / -22~ 167 °F
- Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output: Max. 10A, 100V ~240V AC
- Input Power Cable Length: 1.5m (5ft)
- Output Power Cable Length: 30cm (1ft)
- Buzzer Alarm: High and Low Temperature Alarm
- Sensor Type: NTC sensor (Including)
- Sensor Length: 2m / 6.56ft
- Relay Capacity: Cooling/ Heating (10A, 100-240VAC)
- Storage Temperature: -20~ 60 °C / -4~ 140 °F
- Storage Humidity: 20~85% (No Condensate)
- Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)